Prohibited means bottom openings are prohibited, and Prohibited for liquids means bottom openings are authorized for solid material only. N73 Packagings consisting of outer wooden or fiberboard boxes with inner glass, metal or other strong containers; metal or fiber drums; kegs or barrels; or strong metal cans are authorized and need not conform to the requirements of part 178 of this subchapter. This training must be documented in training records required by 172.704(d). If appropriate, a package containing this material must conform to the additional labeling requirements of 172.402 of this subchapter. Except as provided in 173.185(c)(3) of this subchapter, the package must be marked UN 3091 Lithium metal batteries packed with equipment, or UN 3481 Lithium ion batteries packed with equipment, as appropriate. A212 UN 2031, Nitric acid, other than red fuming, with more than 20% and less than 65% nitric acid intended for use in sterilization devices only, may be transported on passenger aircraft irrespective of the indication of forbidden in columns (9A) of the 172.101 table provided that: a. Examples of equipment are lawnmowers, cleaning machines, or model boats and model aircraft. 337 Authorizes the use of regulated waste containers manufactured prior to October 1, 2006 to be marked with the alternative shipping name of Regulated medical waste, UN3291 and arrows that deviate as prescribed in 172.312(a)(2) in that they may be black or white. B133 Hydrochloric acid concentration not exceeding 38%, in Packing Group II, is authorized to be packaged in UN31H1 or UN31HH1 intermediate bulk containers when loaded in accordance with the requirements of 173.35(h) of this subchapter. Net weight of contents in wooden boxes, barrels or kegs may not exceed 45 kg (99 pounds). The packaging may not be loaded with a material outside of the packaging's design temperature range. 379 When offered for transport by highway, rail, or cargo vessel, anhydrous ammonia adsorbed or absorbed on a solid contained in ammonia dispensing systems or receptacles intended to form part of such systems is not subject to the requirements of this subchapter if the following conditions in this provision are met. B78 Tank cars must have a test pressure of 4.14 Bar (60 psig) or greater and conform to Class 103, 104, 105, 109, 111, 112, 114 or 120. Thickness of stainless steel for tank shell and heads must be the greater of 7.62 mm (0.300 inch) or the thickness required for a portable tank with a design pressure at least equal to 1.5 times the vapor pressure of the hazardous material at 46 C (115 F). site when drafting amendatory language for Federal regulations: Choosing an item from b. 66 Formulations of these substances containing not less than 30 percent non-volatile, non-flammable phlegmatizer are not subject to this subchapter. Rigid plastics: 11H1, 11H2, 21H1 and 21H2, c. Composite with plastic inner receptacle: 11HZ1, 11HZ2, 21HZ1 and 21HZ2, e. Wooden: 11C, 11D and 11F (with inner liners). This document is available in the following developer friendly formats: Information and documentation can be found in our The adsorbent or absorbent material shall not meet the definition or criteria for inclusion in Classes 1 to 8; c. The maximum contents of a receptacle shall be 10 kg of ammonia; and. A bulk packaging containing sulfur is not subject to the placarding requirements of subpart F of this part, if it is marked with the appropriate identification number as required by subpart D of this part. a. 102 The ends of the detonating cord must be tied fast so that the explosive cannot escape. d. Receptacles containing adsorbed or absorbed ammonia shall meet the following conditions: (1) Receptacles shall be made of a material compatible with ammonia as specified in ISO 11114-1:2012(E) and ISO 11114-1:2012/Amd 1:2017(E) (IBR, see 171.7 of this subchapter); (2) Receptacles and their means of closure shall be hermetically sealed and able to contain the generated ammonia; (3) Each receptacle shall be able to withstand the pressure generated at 85 C (185 F) with a volumetric expansion no greater than 0.1%; (4) Each receptacle shall be fitted with a device that allows for gas evacuation once pressure exceeds 15 bar (1500 kPa) without violent rupture, explosion or projection; and. Heater pipes must be of welded construction designed for a test pressure of 500 psig. (3) When no bottom openings are authorized, the alternative portable tank must not have bottom openings. TP37 IM portable tanks are only authorized for the shipment of hydrogen peroxide solutions in water containing 72% or less hydrogen peroxide by weight. When transported by vessel, flexible, fiberboard or wooden IBCs must be sift-proof and water-resistant or be fitted with a sift-proof and water-resistant liner. 74 During transport, this material must be protected from direct sunshine and stored or kept in a cool and well-ventilated place, away from all sources of heat. (5) N codes. Where different hazardous materials in limited quantities are packed together in the same outer packaging, when a gross mass is indicated Column 4 of 173.27 Table 3, the net quantity of each hazardous material must be shown in addition to the gross mass of the completed package. 38 If this material shows a violent effect in laboratory tests involving heating under confinement, the labeling requirements of Special Provision 53 apply, and the material must be packaged in accordance with packing method OP6 in 173.225 of this subchapter. 150 This description may only be used for ammonium nitrate-based fertilizers. This includes hybrid electric vehicles powered by a fuel cell, an internal combustion engine, and wet, sodium or lithium batteries installed. 175 This substance must be stabilized when in concentrations of not more than 99%. metal other than steel or aluminum (50N). For example, nickel-metal hydride batteries transported by vessel in certain quantities are covered by another entry (see Batteries, nickel-metal hydride, UN3496). If a tank car tank is equipped with a reclosing pressure relief valve, the tank must also be equipped with a vacuum relief valve. developer resources. (Toy caps), 1.4S or NA0337, Toy caps, 1.4S are not subject to the subpart E (labeling) requirements of this part when offered for transportation by motor vehicle, rail freight, cargo vessel, and cargo aircraft and, notwithstanding the packing method assigned in 173.62 of this subchapter, in conformance with the following conditions: a. Multiple provisions can be listed in this column. 441 For marine pollutants transported under UN3077, Environmentally hazardous substance, solid, n.o.s. or UN3082, Environmentally hazardous substance, liquid, n.o.s. and for purposes of shipping paper and package marking requirements, the technical name used in association with the basic description may be a proper shipping name listed in the 172.101 Hazardous Material Table; provided that the name chosen is not also an entry that includes n.o.s. as a part of the name or one that has a G in column (1) of the table. Testing must be conducted on at least three packages as prepared for transport. 237 Batteries, dry, containing potassium hydroxide solid, electric storage must be prepared and packaged in accordance with the requirements of 173.159(a) and (c). For UN identification numbers 3531, 3532, 3533, and 3534, IBCs must be designed and constructed to permit the release of gas or vapor to prevent a build-up of pressure that could rupture the IBCs in the event of loss of stabilization. 47 Mixtures of solids that are not subject to this subchapter and flammable liquids may be transported under this entry without first applying the classification criteria of Division 4.1, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. 172-29, 41 FR 15996, Apr. However, button cell batteries installed in equipment (including circuit boards) need not be considered; and, c. The shipping paper must indicate UN 3091 Lithium metal batteries packed with equipment or UN 3481 Lithium ion batteries packed with equipment, as appropriate. Codes in Column 7 may be numbers, or a combination of letters and numbers. Have accident damage protection which conforms with 178.345-8 of this subchapter; c. Have a MAWP or design pressure of at least 87 psig: and. Use the navigation links in the gray bar above to view the table of contents that this content belongs to. When a specific portable tank instruction is specified by a T Code in Column (7) of the 172.101 Table for a specific hazardous material, a specification portable tank conforming to an alternative tank instruction may be used if: (A) The alternative portable tank has a higher or equivalent test pressure (for example, 4 bar when 2.65 bar is specified); (B) The alternative portable tank has greater or equivalent wall thickness (for example, 10 mm when 6 mm is specified); (C) The alternative portable tank has a pressure relief device as specified in the T Code. Sealed packets and articles containing less than 10 mL of a Class 3 liquid in Packing Group II or III absorbed onto a solid material are not subject to this subchapter provided there is no free liquid in the packet or article. g. The test results shall be documented, shall be traceable, and shall be made available to a representative of the Department upon request. N8 Nitroglycerin solution in alcohol may be transported under this entry only when the solution is packed in metal cans of not more than 1 L capacity each, overpacked in a wooden box containing not more than 5 L. Metal cans must be completely surrounded with absorbent cushioning material. An unused lighter or a lighter that is cleaned of residue and purged of vapors is not subject to the requirements of this subchapter. B15 Packagings must be protected with non-metallic linings impervious to the lading or have a suitable corrosion allowance. Packaging must be UN standard metal drums attached with heavy duty steel strapping to a pallet; and. that, for example, are used for medical, analytical, diagnostic, testing, or repair purposes. 15, 1976, unless otherwise noted. N42 1A1 drums made of carbon steel with thickness of body and heads of not less than 1.3 mm (0.050 inch) and with a corrosion-resistant phenolic lining are authorized for stabilized benzyl chloride if tested and certified to the Packing Group I performance level at a specific gravity of not less than 1.8. Microsoft Edge, Google Chrome, Mozilla Firefox, or Safari. A rocket motor to be considered nonpropulsive must be capable of unrestrained burning and must not appreciably move in any direction when ignited by any means. These entries include hybrid electric vehicles powered by both an internal combustion engine and batteries. The battery has been tested as a primary lithium battery; and. TP22 Lubricants for portable tank fittings (for example, gaskets, shut-off valves, flanges) must be oxygen compatible. When a placard is displayed, the placard must be the placard shown in 172.560. 49 Mixtures of solids that are not subject to this subchapter and corrosive liquids may be transported under this entry without first applying the classification criteria of Class 8, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. Note also that this exception does not apply to batteries that have been reconditioned for reuse. The mixture for emulsions typically has the following composition: 60-85% ammonium nitrate; 5-30% water; 2-8% fuel; 0.5-4% emulsifier or thickening agent; 0-10% soluble flame suppressants; and trace additives. shipping name in Column (1) of the 172.101 Table, it means that the mate-rial is known to pose a risk to humans. TP40 The portable tank must not be transported when connected with spray application equipment. Only Specifications MC 304, MC 307 or DOT 407 cargo tank motor vehicles are authorized for transportation by vessel. 45 Temperature should be maintained between 18 C (64.4 F) and 40 C (104 F). Single unit tank car tanks must have a reclosing pressure relief device having a start-to-discharge pressure set at no more than 1551 kPa (225 psig). Symbols, if used, must be registered with the Associate Administrator. Use of these proper shipping names for domestic shipments may be made only under a DOT special permit, as defined in, and in accordance with the requirements of subpart B of part 107 of this subchapter. (iv) T75. Company Name: Artisan EHS Consulting, LLC. B130 When transported by motor vehicle, used diatomaceous earth filter material is not subject to any other requirements of this subchapter except for the shipping paper requirements of subpart C of part 172 of this subchapter; emergency response information as required by 172.602(a)(2) through (a)(7) of this subchapter; and the marking requirements of 172.302 of this subchapter, if the following requirements are met: a. Packagings are non-DOT specification sift-proof motor vehicles or sift-proof roll-on/roll-off bulk bins, which are covered by a tarpaulin or other equivalent means.